【供應Beeprog2C 燒錄器】?jī)r(jià)格,廠家,圖片,集成電路/IC,東莞嘉多利
Beeprog2C 萬用燒錄器采用USB接口，支持燒錄各種不同類型和不同工藝的芯片而且不需要任何模組，滿足您現在和將來的需求。通過用ISP連接器，燒錄器可以在電路板上燒直接燒錄芯片。Beeprog2C 不僅具備燒錄器功能，而且具有TTL/COMS邏輯IC測試和存儲器功能。
Beeprog2C通過USB（2.0/1.1）口或者任何標準并行（打印機）口就能連接到IBM 486或級別更高的PC.手提.臺式電腦.燒錄器也支持IEEE1284（ECP/EPP)高速并口。支持選擇的USB/LPT口把BeeProg2C連接到任一PC
BeeHive304--ELNEC 量產燒錄器
四個獨立的通用燒錄座程序燒錄非常適合高需求的桌面編程和自動編程系統基于先進的FPGA設計,強大的ARM處理器和內部SSD,BeeHive304準備項目設備速度理論上可行4×64 -針豐富的特性,jing確的和強大的pindriver提供編程信號可編程設備的每一個技術它支持設備VCC電壓0.8 v超快速的編程速度,全球最快的程序員之一?？沙掷m(xù)的編程速度大于22.5 mb每秒2 GB eMMC NAND閃存芯片在不到100秒就可以完成,如果支持內存不夠快它利用通用編程模塊,專用集成電路bao裝類型和專門的模塊,設計優化為特定設備的家庭編程模塊接口的ESD保護每針(pindriver也支持信號)雙重連接到PC:USB(2.0高速)和局域網(1 Gbit)舒適的和易于使用的控制程序,適用于所有版本的Windows從Windows XP到Windows 8.1(32位和64位)兩個BeeHive304單元可以被附加到一個控制電腦更好地利用編程工作實現到可用的第三方自動化程序員和吃機器使用簡單的遠程控制一個軟件可以高達64編程網站在一個自動化的程序員(16 x BeeHive304程序員)獨特的快速反應客戶的需求——軟件更新,可以在{yt}之內完成 高速兼容USB 2.0端口,480 Mbit / s的傳輸速率100 mbit局域網端口車載智能:強大的處理器(ARM9 400 MHz)和基于FPGA的狀態機(基本時鐘50 MHz加鎖相環)內置mSATA SSD的內部緩沖區(32 gb,升級到更高容量)3 D / A轉換器VCC1、VCC2 VPP,可控的上升和下降時間VCC1 VCC2范圍0.8 v . .(步驟10 mv 7 v / 1)VPP范圍0 v . .25 v / 1(步驟25 mv)溫度可控的設置自我測試功能防止激增和ESD電源輸入,USB和局域網端口和別針的編程模塊接口(PMI)(IEC1000-4-2:15千伏空氣,8千伏聯系)防靜電手腕帶連接兩個墊圈連接螺釘pindrivers:64通用VCC1 / VCC2和VPP可以連接到每個銷2個獨立的基于FPGA的TTL，提供H、L、CLK,引體向上,下拉在所有pindriver別針,邏輯0級,75 v - 5 v(人工和IOH目前20 ma)邏輯信號頻率:125 mhz(3.3 v),80 mhz(5 v)模擬pindriver輸出電平選擇25 V 0.8 V當前限制、過電流關閉電源故障關閉連續性試驗。
量產燒錄器BeeHive208S
BeeHive208S量產燒錄器優質供應商BeeHive208S量產燒錄器價格
編程器Beehive208S,Beehive204,一寫多IC燒錄器,萬用量產_編程器_
BeeHive208S programmer is practically identical with the BeeHive8S programmer, difference is 'only' much higher programming speed (up to 10x) of high-capacity memories.The BeeHive208S is an extremely fast universal 8x 48-pin-drive Stand-Alone concurrent multiprogramming system designed for high volume production programming with minimal operator effort. The chips are programmed at near theoretical maximum programming speed.The BeeHive208S consists of 8 independent isolated universal programming modules, based on the BeeProg2 programmer 硬件. Therefore the sockets can run asynchronously (concurrent programming mode). Each programming module starts programming at the moment the chip is detected as inserted in the socket properly - independent of the status of the other programming modules. As a result, seven programming modules can be working while replacing the programmed chip on the eighth.Graphics control unit with touch screen provides basic control and easy monitoring of the programming flow.Modular construction of the硬件 - the programming modules work independently - allowing for continued operation if a part of the circuit becomes inoperable. It also makes service quick and easy.Hands-free operation: asynchronous and concurrent operation allows a chip to begin programming immediately upon insertion. The operator merely removes the finished chip and inserts a new chip. Operator training is therefore minimized.Supports all types of the silicon technologies found in the programmable devices of today and tomorrow without family-specific modules. You can be sure that new device support will require only a software update and (if necessary) a simple package convertor (programming adapter), therefore minimizing ownership costs.Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in bines very competitive pricing with excellent 硬件 design for reli
