杜笙(tulsion)A-8XMP固體堿催化劑樹脂
杜笙Tulsion A-8X MP
ISO-9001/ISO-14001/OHSAS-18000
催化劑級大孔弱堿性陰離子交換樹脂
Tulsion A-8X MP是一款大孔催化劑級的弱堿性陰離子交換樹脂，主要用于催化作用和一些化學制程中，特別是在MEG凈化中。工業生產中催化劑和一些化學制程中離子交換樹脂的使用正在變得越來越重要。與同種?的催化劑相比他們具有下列優勢：容易處理。降低或去除廢棄物處理的問題。提高產品的純度和產量。比使用同等催化作用的酸的成本低。排除或者大大的減弱腐蝕問題。強力的抗污染能力，在經過去污染處理后能恢復原來性能。
Tulsion A-8X MP催化劑級樹脂具有出色的物理和化學性能，并且極耐磨損。且這種樹脂具有良好的熱穩定性和可再生使用性能。
典型特性（TYPICAL CHARACTERISTICS）：TulsionA-8XMP
類型/Type大孔弱堿性陰離子交換樹脂
主體結構/Matrix structure聚苯乙烯共聚物/Polystyrene copolymer
物理型式/Physical form濕潤球狀/Moist spherical beads
官能團/Functional group叔胺基/Tertiary amine
離子型式/Ionic form游離堿/Free base
總交換量/Total exchange capacity(meq/ml)1.3meq/ml
目數/Screen size USS(濕)16 to50
粒度/Particle size(95%minm.)0.3-1.2mm
膨脹率/Swelling(approx.)游離堿->Cl-18%
濕度/Moisture content?55±3%
容積密度/Backwash settled density 640-680gm/lit(40-42lbs/cft)
{zd0}溫度/Maximum Thermal Stability80℃（175℉）
PH?范圍/PH range0-9
溶解度/Solubility不溶
操作條件特性（TYPICAL?OPERATING?CONDITIONS）：?Tulsion??A-8X?MP
樹脂床高度/Resin bed depth 600 mm
{zd0}流速/Maximum service flow 40m/hr/m
逆洗膨脹空間/Backwash expansion space 50-70%
逆洗膨脹空間/Backwash expansion flow rate(25℃)4-?6m/hr/㎡
再生劑/Regenerant NaOH,Na2CO3,NH4OH
再生程度/Regeneration level 120%of theoperating capacity fort NaOH
再生濃度/Regeneration concentration1-5%
再生時間/Regeneration time20-60分鐘
操作溫度/Operating temperature 80℃ max
沖洗流速/Rinse flow rate:慢/slow再生流速/At?Regeneration flow rate
快/fast 工作流速/At service flow rate
沖洗體積/Rinse volume 2-7m/m
余氯/Free chlorine未檢測到/Not traceable
渾濁度/Turbidity小于2 NTU/Less than 2 NTU
鐵和重金屬/Iron and heavy metals小于0.1ppm/Less than 0.1 ppm
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:17090831380，,13917047856，QQ315684815.
