廣告
Floodlights are landscape lighting fixtures we often see, often installed in the corners of buildings or tree trunks. If installed on a tree, will it affect the tree? So how to fix the LED projector?
In order to reduce the friction between the hoop support and the tree trunk, a 4mm thick black rubber pad is used on the inside of the hoop support. At the same time, in order not to affect the beauty, the rubber mat cut into a wide strip with the hoop, fixed on the hoop with tie wire, when the installation and fastening in place, the rubber gasket first force, after appropriate tightening and then install throwing light lamps, so as to effectively ensure that bark will not be damaged.
In addition, in the process of the growth and thickening of the trunk, the rubber skin itself has a certain cushion, and the hoop nut is unscrewed twice a year according to the growth of the tree, so the hoop will not cause damage to the tree.
Finally, because the LED projector is a cold light source, it adopts active heat dissipation design, and the practical time is no more than four hours. So the thermal damage to the trees during installation is negligible.
