空心噴嘴噴霧特性及用途：
偏轉系列空心噴嘴結構簡單，噴霧均勻，使用方便；主要適用于煉鋼廠小方坯連鑄機的二次冷卻。同時也能夠用于氣體的清洗，冷卻水處理，產品去污、噴濕、海水噴灑等。
噴嘴連接螺紋為
3/8 A B C
1/2 28 31 17
3/4 33 37 22
11/2 60 67 50
噴嘴材質為不銹鋼和黃銅，2205材質為主；
The hollow nozzle spray characteristics and USES:
Deflection series hollow nozzle structure is simple, spray evenly, easy to use;Mainly suitable for steel mills small billet caster of secondary cooling.At the same time can also be used for gas cleaning, cooling water treatment, product decontamination, spray wet, water spray, etc.
Nozzle thread for connection
3/8 A B C
28 31 1/2 17
Three-quarters of 33 37 22
1 1/2 60, 67 50
Nozzle is made of stainless steel and brass, 2205 material is given priority to;
噴霧噴嘴噴霧角度和覆蓋范圍：
噴霧夾角在不同距離下（從噴嘴口算起）的理論覆蓋范圍（厘米）THEORETICAL COVERAGE AT VARIOUS DISTANCES (IN cm)FROM nozzle ORIPICE 各不相同。
在實際噴霧中，有效噴霧角度因噴霧距離而異，當液體黏度碧水高時，其噴射角度變小，具體取決于黏度，噴嘴流量及噴射壓力等。
沖擊力 Impact
噴霧對目標表面的沖擊，有幾處不同的表示方法，與噴霧噴組性能有用的沖擊值是每平方厘米沖擊力。本質上，該值取決于噴霧形狀分布和噴霧角度，首先用公式確定理論總沖擊力。然后從表中可查得占理論總沖擊力的每平方厘米百分率并乘以理論總沖擊力。結果是以公斤/平方厘米表示的噴霧沖擊力。液柱流噴嘴產生很大公斤/平方厘米沖擊力，可按公式1.9*（噴射壓力，公斤/平方厘米）計算。
工作壓力Operating Pressure
我們目前提供是數據是噴霧噴嘴或零部件常用的壓力范圍。一些噴霧噴嘴和零配件可在所給壓力之下或之上工作。另一些可在我們的工廠改進或再設計，以適應特定新用途的需要。當您需要更多的噴嘴資料時，請于所在地的理人取得聯系。
The values given in the tabulation sections of this catalog indicate the most commonly used pressure ranges for the most commonly used pressure ranges for the associated spray nozzle for accessories.Some spray nozzles and accessories can perform below or above the pressure shown.
實心錐形方形噴嘴設計特點：
G-SQ﹨H-SQ系列噴組ID特點是能產生實心錐形噴霧形狀，噴射區域呈正方形，噴流角度為40-105°；G-SQ﹨H-SQ系列噴組能在大范圍的壓力和流率下產生分布均勻，液滴大小中等到偏大的噴霧；這種均勻的噴霧分布來源于獨特的頁片設計。大而通暢的流道和先進的噴流控制特性。這種噴嘴非常適合安裝在要求徹底覆蓋的矩形噴霧區域的地方；
Solid tapered square nozzle design features:
G - SQ ﹨ H - SQ series spray group ID feature is to produce solid spray cone shape, the injection area is square, jet Angle of 40-105 °;G - SQ ﹨ H - SQ series can spray group in a wide range of pressure and flow rate under the uniform distribution, droplet size medium to large spray;The uniformity of spray distribution is derived from the unique page design.Big and smooth flow and advanced spray flow control characteristics.The nozzle is very suitable for installation in rectangular spray area covered by demanding a thorough;
