聚乙烯絲印油墨銷售廠家！

1、適用范圍：主要用于各種PP料、PE、PET、PPB等制品的絲印移印。
2、產品特性：亮光、遮蓋力高、附著力佳、耐沖壓、耐天那水、耐丁酮、耐汽油。
3、稀釋劑：用我司專用稀釋劑或783開油，用718洗網水清洗網版。 


4、固化劑：不需添加。 


5、油墨調配方法：開罐先攪拌均勻，取所需量油墨稀釋到合適印刷粘度使用。 


6、干燥時間：逢然干燥：室溫表干5-10分鐘，實干24小時；烘烤干燥，80-100度烤20-30分鐘，油墨層方可達{zj0}性能。 


【性能檢測】 


1、3M膠帶劃百格測試：{bfb}無脫落 


2、耐沖壓測試：1mm厚鋁板180°折彎無變化。 


3、耐丁酮測試：用脫脂棉沾丁酮以500G力水平來回100次無脫色。 


4、耐天那水測試：用脫脂棉沾天那水以500G力水平來回100次無脫色。 


【注意事項】 


1、先小量試印確認符合要求后再批量生產。 


2、做好承印物的表面qc油脂及雜質工作，以促進附著效果。 


3、附著力、硬度、耐酸性、耐酒精性、耐化學品性、抗劃傷性、耐磨性等性能的檢測，需要wq固化后方可檢測。 


4、未經允許情況下，不得將本系列油墨與其它類型油墨混用及配色。 


5、油墨，稀釋劑使用及儲存時嚴禁煙火。 


6、使用時注意施工場所的通風狀況良好，盡量避免皮膚直接接觸。 


7、本品不慎濺入口、鼻、眼、耳內，應用大量水清洗或直接求助醫生。 

 Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.