sulfuric acid flow meter,anti-Corrosion meter,liquid flow meter,water meter welcome to our site:http:// http://www.rixin- MSN:xml8023@ tel:86-0595-22483006 No removable part, high accuracy; Fast measure, good repeatability：0.03-0.06 % Small pressure loss, only 1/2△P of orifice； Accuracy：±0.5%； ± 1.0%；± 1.5%； Measure range：1：10；1：20；1：30 Working condition：granule, pulp, sand, fiber have not effect to accuracy Temp：-196℃～+700℃； Working pressure：0-55Mpa； Linner:F46 or follow your need Exact measure: 0.012N m3/h and larger（flow range in left can be smaller） Good interface and magnetic reactance adopt hang weight method test Easy installation and maintenance Material: s.s.304, s.s.316, s.s.316 Power supply: 3.6V Li battery, 24VDC, 3.6V Li battery+24VDC Output form：4-20mA、RS485/RS232, pulse, 0-10V, HART, remote reading, satellite positioning； Protection rank：IP65；IP67； Explosion-prevent symbol：ExiallCT4； ExdllCT4； Standard：Q/QZRX001-2007； what make our target flow meter better and different than other flow meters are as following1. target flow meter won the characteristic of anti-impurity. eg. other flow meter can not test waste water, impurity fuel, base oil...but, we can2.target flow meter can anti-interfere.eg. even near the pump, the accuracy won't be effected.3.target flow meter strongly anti-sticky.eg. strong sticky fluid like bitumen can be tested4.target flow meter have corrosion resistanceeg.sulfate...5. target flow meter has no removable.that means, all functional parts are install in one target flow meter, just install the flow meter by our introduction, everything will be ok. that is why our repair rate is much lower than others. The above is why I insist that we can build a mutually beneficial relation with each other.